HK-Bat-RE frame device with self-locking duck flap 300x450mm + circuit attracting light incl. mounting

for battery operation with 4xAA batteries or power supply 6V DC or optionally with Solar kit from JOSTechnik .

The batteries last depending on quality and manufacturer Purely mathematically, approximately 5-8 months. The battery symbol on the standard display flashes when the battery charge is below 25%. A red LED on the circuit board also lights up, indicating that the batteries should be replaced.

The HK-BAT opens and closes automatic flaps on poultry and chicken coops, aviaries or small animal enclosures at dusk or time or a combination of both.

The flap locks when closed. No predator can push it open.

Real emergency stop or emergency opening function:

If an animal is under the slider during the closing process, the motor is automatically stopped and the flap is immediately opened again.

The closing process is repeated automatically several times. No animal has to struggle to free itself from the weight of the flap, as is common with all other manufacturers!

This feature can be disabled in the settings.

Optional connection options:

• Connection for external buttons available (for manual OPEN and CLOSE operation).
• Outdoor light sensor. (If the HK-Bat is mounted indoors, an external outdoor light sensor is required.)
• Attracting light 6V 3W

The following functions can be set on the integrated display:

Date and time:

• Current time
• Current date

Menu Languages:

• DE (German),
• FR (French)
• EN (English)
• SV (Swedish)
• IT (Italian)
• CZ (Czech)

Operating mode:

Operating modes for opening and closing, the combinations between twilight sensor and timer.

• Time & Light

• Time o Light (+ time delay)

o One of the set conditions for twilight or time must be met.

• Only time

o Lighting conditions are ignored.

• Light only (+ time delay)

o The set % value of the light sensor must be reached. Then the flap closes immediately or after the set closing time delay

• Manual operation

o Open and close with button

Attracting light:

• When powered by a 230V / 6V DC power supply or solar module, an attractant light with a 6V DC 3W light bar can be switched on.
• Attracting light switches on at dusk and before the hatch closes.

For indoor installation or if the installation location is shaded, an external outdoor light sensor is required. For wall mounting, only use the four pre-drilled holes in the housing corners, each next to the cover mount.
This prevents moisture from getting into the housing.

Dimensions frame device:

• Flap size: 300x450mm
• Outside width: 330 mm
• Inner width: 280mm
• Width of rails (each): 25.5mm
• Height closed: 680mm
• Max. height open: 895mm
  

• HK-BAT with integrated light sensor, menu-driven display,
  Control unit dimensions: width 120 mm, length 120 mm, height 55 mm
• wound pull cord
• 4xAA batteries
• Plug-in power supply 230 V / 6 V DC (approved for indoor use only!), Order number: 228
• Duck flap 300x450mm as a fully assembled frame unit with fastening material, order number: 630

Due to manufacturing reasons, slight scratches may appear on the aluminum parts of the flaps. These do not affect functionality and therefore do not constitute a defect!